Laserbot v1.0 від Makeblock – вражаючий робот-гравер для реалізації ваших ідей! Високоякісний робот-конструктор для лазерного гравіювання з відкритим програмним кодом. Відтепер ви власноруч можете створювати унікальні сувеніри, персоналізовані листівки, філігранне ритування на фоторамках - будь-які подарунки із вражаючою деталізацією у домашніх умовах. Лазер високої точності дозволить створити високоякісне гравіювання на: папері, картоні, дереві, гумі, пластику, металі і кераміці. Спеціальні окуляри гарантуватимуть безпеку. Пристрій працює на програмному забезпеченні mLaser. Два режими різних рівнів користувачів дозволять як новачкам, так і експертам легко опанувати роботу гравера. Рекомендований вік: від 12 років.
Features | |
Number of components | 305 |
Guarantee | |
Guarantee | 12 months |
Laser Features | |
Size | 33 x 79 |
Working hours, h | 5 |
Power, V | 1.6 |
Distance | 20-50 |
Accuracy, mm | 1 |
Power Indicator, V | 1.3 |
Wavelength, Nm | 445 |
Voltage | 12V DC ± 30% |
Operating current, mA | 600 |
Beam diameter, mm | 5 |
Laser Level | IV (WARNING: do not aim at eyes or skin) |
Working surface | -40°С...+50°С |
Storage temperature | -50°С...+60°С |
Main | |
A type | Robot-Constructor |
Power supply | network |
Colour | blue |
Connection interface | USB |
Processor board | MegaPi |
Weight, g | 3870 |
Packaging parameters | |
Width | 100 mm |
Height | 360 mm |
Length | 580 mm |
Weight | 4.45 kg |
Volume | 0.0209 m3 |
Processed materials | |
Paper | Engraves, Cuts |
Carton | Engraves, Cuts up to 0.8 mm |
Wood Board | Engraves, Cuts up to 0.6 mm |
Rubber sheet | Engraves, Cuts up to 0.5 mm |
Foam Paper | Engraves, Cuts up to 3 mm |
Dark Colored Cloth (denim cloth, cotton cloth and linen) | Engraves, Cuts up to 1 mm |
Non-Transparent ACRYLIC (Plexiglas) | Only black plexiglas cuts, Engraves |
Plastic Sheet | Engraves |
Polyurethane sheet | Cuts up to 0.8 mm, Engraves |
Steel | Engraves |
Ceramics | removes outer layer |
Mirror, Glass, Aluminum, Stainless Steel | Does not cut, Does not engrave |
Specifications | |
Working Area | 383 x 367 |
Connection | USB |
Supported File Types | PNG, JPG, BMP, SVG, DXF |
Frame Material | anodized aluminum |
Dimensions | 535 x 637 x 184 |
Software | mLaser |
Accuracy, mm | 0.1 |
Maximum Working Speed, mm/s | 200 |
Power | 100-240 V |
Net weight, kg | 3.87 |
Gross weight, kg | 4.475 |
Maximum Working Area | 383 x 367 mm |
Speed | 200 mm/s |
Register to leave a review about the product and earn reward points!
There are no reviews for this product.
Give feedback